Case Study

SpeeTile10 with tubing laid on a solid concrete floor before the self-leveling screed is poured on.

WARP Office, Self-leveling mortar has just been poured and is setting!

SpeeTile10 with tubing laid on a solid concrete floor in a lovely cottage. 75mm tube spacing

SpeeTile12 with tubing installed onto a main wall of an office building under construction. 100mm tube spacing

SpeeTile10 with tubing laid on a solid concrete floor with the SpeeTop self-leveling mortar being poured. 75mm tube spacing

SpeeTile10 with tubing laid on a solid concrete floor prior to self-leveling mortar being poured. 75mm tube spacing

SpeeTile10 with tubing laid on a solid concrete floor prior to self-leveling mortar being poured.

SpeeTile10 being covered with SpeeTop self-leveling mortar giving a shiny levelled finish.

SpeeTherm15 completed in a kitchen. SpeeTherm totally covered by our 10-50 conductivity heat spreading aluminum for extra heat saving more of your energy!

SpeeTherm15.  Our SpeeTherm is totally covered by our 10-50 conductivity heat spreading aluminum with 100mm tubing centers for extraordinary coverage.

SpeeTile10 & SpeeTherm15 laid on the same floor using the same manifold.

Solid floor before SpeeTile10 tiles and tubes. After the system is laid & finally with self leveling mortar. The total build is 15mm.

SpeeTile10 with tubing laid on a solid concrete floor prior to self-leveling mortar being poured. 75mm tube spacing.

SpeeTile10 with tubing laid on a solid concrete floor prior to self-leveling mortar being poured. 75mm tube spacing.